HPE Aruba Instant On 1930 24G 4SFP/SFP+ Switch - L3 - 24 x 10/100/1000 + 4 x 1 Gigabit / 10 Gigabit SFP+ - rack-mountable

HPE Aruba Instant On 1930 24G 4SFP/SFP+ Switch – L3 – 24 x 10/100/1000 + 4 x 1 Gigabit / 10 Gigabit SFP+ – rack-mountable

Mfg PartJL682A#ABA, Rack Simply Part110225
$235.77

104 In Stock

Quantity
Product Description
HPE Aruba Instant On 1930 24G 4SFP/SFP+ Switch - switch - 28 ports - managed - rack-mountable
Device Type
Switch - 28 ports - L3 - managed
Enclosure Type
Rack-mountable 1U
Subtype
Gigabit Ethernet
Ports
24 x 10/100/1000 + 4 x 1 Gigabit / 10 Gigabit SFP+
Performance
Switching capacity: 128 Gbps ¦ Throughput: 95.23 Mpps ¦ Latency (1 Gbps): 2.4 µs ¦ Latency (10 Gbps): 1.3 µs
Capacity
Link aggregation ports: 8 ¦ IPv4 routes (static): 32 ¦ VLANs supported: 256 ¦ Access Control Entries (ACEs) per ACL: 480 ¦ Packet buffer size: 1.5 MB
MAC Address Table Size
16000 entries
Jumbo Frame Support
9216 bytes
Routing Protocol
Static IP routing
Remote Management Protocol
SNMP 1, RMON, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, RADIUS
Features
Flow control, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, IPv6 support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Trusted Platform Module (TPM), LLDP support, Link Aggregation Control Protocol (LACP), Energy Efficient Ethernet, Class of Service (CoS), BPDU Filter
Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az
Power
AC 120/230 V (50/60 Hz)
Dimensions (WxDxH)
17.4 in x 8.7 in x 1.7 in
Weight
5.31 lbs
Localization
English / United States
Manufacturer Warranty
Limited lifetime warranty

Flash Memory

Installed Size
256 MB

RAM

Installed Size
512 MB

Header

Product Line
HPE Aruba Instant On
Model
1930 24G 4SFP/SFP+ Switch
Localization
English
Country Kits
United States
Brand
Aruba
Manufacturer
Hewlett Packard Enterprise
Packaged Quantity
1

Service & Support

Type
Limited lifetime warranty

Dimensions & Weight

Width
17.4 in
Depth
8.7 in
Height
1.7 in
Weight
5.31 lbs

Networking

Type
Switch
Remote Management Protocol
HTTP
Ports Qty
28
Routing Protocol
Static IP routing
Subcategory
Network hubs and switches
Advanced Switching
Layer 3
Manageable
Yes
Form Factor
Rack-mountable
Subtype
Gigabit Ethernet
Jumbo Frame Support
9216 bytes

Miscellaneous

Encryption Algorithm
SSL
Color Category
White
  • Smart-managed layer 2+ Ethernet switch series ready to deploy
  • Security controls let you define access in each area of your network, keeping your business data safe
  • Convenient mobile app and web-based GUI for set up, management and troubleshooting
  • Plug-and-Play switches that work together with Instant On APs right out of the box
  • Mobile app to easily setup, monitor and manage your network
  • Protect your network from unauthorized access with IEEE 802.1X and VLANs
  • Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks

Extra Features

  • Includes a Trusted Platform Module (TPM) for secure hardwarebased generation and storage of cryptographic keys used for secure connection to the Instant On cloud portal.
  • Support for up to 256 VLANs with a VLAN ID range of 2-4093 IEEE 802.1X access control Authentication of network users on a per port basis prior to permitting network access. Port authentication includes RADIUS assigned VLAN, dynamic VLAN creation, guest VLAN or into an unauthenticated VLAN. Automatic denial-of-service protection Monitors for malicious attacks and protects the network by blocking the attacks.
  • Protects against unknown unicast, broadcast and multicast storms with user-defined thresholds.
  • The switch supports RADIUS authentication with primary and backup server configuration.
  • A robust set of attributes and statistics are available for collecting information from the switch.
  • Provides secure management access to administrators in the specified VLAN.
  • Minimizes the network disruption by automatically detecting and disabling ports that experience link flap events.
  • Compliant with IEEE 802.3az standard requirements to save energy during periods of low data activity.
  • The switch saves power by automatically shutting down power to inactive ports. Power is restored on a port upon link detection.
  • The switch provides an estimated cumulative energy savings due to green Ethernet features being enabled.
  • Includes variable speed fans operating only at the speed necessary to maintain operating temperature to reduce excess noise and power consumption.
  • Provides a flow-throttling mechanism propagated through the network to prevent packet loss at a congested node.
  • Supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP on local web).
  • If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms.
  • Drops BPDU packets when STP is enabled globally but disabled on a specific port.
  • Supports up to 9216 bytes frame size to improve the performance of large data transfers.
  • Improves network performance through multicast filtering, instead of flooding traffic on all ports.
  • Groups together multiple ports up to a maximum of eight (8) ports per trunk automatically using Link Aggregation Control Protocol (LACP), or manually, to form a high-bandwidth connection to the network backbone that helps prevent traffic bottlenecks. The 8-port models support 4 trunks, 24-port models support 8 trunks, and 48-port models support 16 trunks.
  • Defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN for automatic configuration of network devices such as IP phones.
  • The ARP table displays all of the IP addresses that have been resolved to MAC addresses, either dynamically or through static entry configuration.
  • Supports manual routing configuration of up to 32 static routes.
  • Recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones.
  • Enables network traffic filtering by creating an ACL, adds rules and matches criteria to an ACL, and applies the ACL to permit or deny on one or more interfaces or a VLAN. Supports for 50 inbound IPv4 and MAC ACLs with up to 480 ACEs.
  • Enables switches to be managed and deployed at the IPv6 network’s edge.
  • Sets and enforces per-port ingress traffic limits based on percentages or packets per second.
  • Dynamic ARP protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data.
  • Provides network security by filtering untrusted DHCP messages.
  • Ports in a port isolation group are restricted from forwarding Layer 2 traffic between ports in that group, providing data privacy and security.
  • Provides different mechanisms for secure file transfer through SCP (Secure Copy Protocol) or TFTP.
  • Provide independent primary and secondary software images for backup while upgrading.
  • Password strength checking and aging feature provides enhanced security to user account administration to the local web management interface.
  • Encrypts all HTTP traffic, secures access to the local browserbased management of the switch.
  • Facilitate management of the switch, as the device can be discovered and monitored from an SNMP management station.
  • Remote monitoring (RMON) provides advanced monitoring and reporting capabilities for statistics, history, alarms and events. RMON data is retrieved from the switch through a network management platform over SNMP.