HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch

Mfg PartJH326A Racksimply Part102073
$8,726.64

On Backorder

Quantity
Product Description
HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch - switch - 48 ports - managed - rack-mountable
Device Type
Switch - 48 ports - managed - stackable
Enclosure Type
Rack-mountable 1U
Subtype
Gigabit Ethernet
Ports
48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+
Power Over Ethernet (PoE)
PoE+
PoE Budget
1440 W
Performance
Throughput: up to 190.5 Mpps ? Routing/switching capacity: 256 Gbps
Capacity
Simultaneous VLANs: 4094 ? IPv4 routing table entries: 32768 ? IPv6 routing table entries: 16384
Jumbo Frame Support
9KB
Routing Protocol
RIP-1, RIP-2, IGMPv2, IGMP, PIM-SM, IGMPv3, MSDP, MLD
Remote Management Protocol
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP
Features
Flow control, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, Weighted Round Robin (WRR) queuing, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), DHCP server, Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), STP Root Guard, IPv4 support, LLDP support, Smart Link Pass-Through, dynamic ARP protection, DHCP protection, port isolation, non blocking ports, Strict Priority (SP), Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF), OpenFlow support, IP source guard
Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3az
Power
AC 120/230 V (50/60 Hz)
Power Redundancy
Optional
Dimensions (WxDxH)
17.3 in x 18.1 in x 1.7 in
Weight
27.56 lbs

Flash Memory

Installed Size
512 MB

RAM

Installed Size
2 GB

Header

Product Line
HPE
Model
5130 48G PoE+ 4SFP+ 1-slot HI
Brand
HPE
Manufacturer
Hewlett Packard Enterprise
Packaged Quantity
1

Dimensions & Weight

Width
17.3 in
Depth
18.1 in
Height
1.7 in
Weight
27.56 lbs

Networking

Type
Switch
Remote Management Protocol
SCP
Ports Qty
48
Routing Protocol
IGMPv3
Stackable
Stackable
Subcategory
Network hubs and switches
Power Over Ethernet (PoE)
PoE+
Manageable
Yes
Form Factor
Rack-mountable
Subtype
Gigabit Ethernet
Jumbo Frame Support
9KB

Miscellaneous

Encryption Algorithm
SSL
Color Category
Black
  • The HPE FlexNetwork 5130 HI Switch Series delivers scalability and resiliency for medium and large enterprise networks
  • The HPE FlexNetwork 5130 HI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch
  • The HPE FlexNetwork 5130 HI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater policy-driven application security
  • The HPE FlexNetwork 5130 HI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) Software to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management

What's in the box

  • (1) HPE 5130 48G PoE+ 4SFP+ HI with 1 Interface Slot Switch

Additional Features:

  • The HPE FlexNetwork 5130 HI Switch Series delivers scalability and resiliency for medium and large enterprise networks. It supports stacking, dual power supplies; 10GbE uplinks; static and RIP routing; PoE+; ACLs; IPv6 and power savings.The HPE Intelligent Resilient Framework (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks.Offers scalable stacking and backhaul capacity with four fixed 10GbE uplinks and slots for two more 10GbE uplinks, including support for 10GBASE-T.Dual, redundant, hot-swappable power supplies keep your network up and running and deliver up to 1440 Watts of PoE+ for powered cameras, phones and wireless access points.No software licensing required.
  • The HPE FlexNetwork 5130 HI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch.Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.
  • The HPE FlexNetwork 5130 HI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater policy-driven application security. Per-user access control lists (ACLs) provide identity-driven security and access control.ACLs provide IP Layer 2 to Layer 4 traffic filtering and support global ACL, VLAN ACL, port ACL, and IPv6 ACL.Security with encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS.Supports industry standard MACsec for greater end-point or switch-to-switch security.
  • The HPE FlexNetwork 5130 HI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) Software to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.